You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information. Switch to the US site. 

This website uses cookies

By continuing to use this website you consent to using cookies. For more information about cookies and how we use them, please see our Privacy Policy.

Freedom Bath

Freedom bath is designed for residents who are able to access the tub independently or with support using a walking aid or standing and raising equipment.

Freedom features a distinctive, electrically powered Roll-Door that rolls down to allow residents to enter and exit the tub. The tub has a raised, contoured base that serves as a seat for the resident to remain while in the bath.

Once the resident is securely seated in the tub, the Roll-Door rolls up so the tub can be filled with water.

Designed with Albert, Barbara and Carl in mind.
Facilitates tub access without additional bath lifter.
The distinctive Roll-Door can be raised or lowered electrically. When lowered, it retracts into the base of the tub, creating wide access for entering and exiting the tub.

The bath is designed with a contoured base that serves as a seat, while the tub is equipped with a control panel, shower wand with holder, mixer valve, and a grip handle for additional support.

Enhance the bathing experience with optional Air Spa therapy, a system which creates tiny bubbles in the water to create a gentle massaging effect.

Designed for patients and residents with mobility levels A to C.

Technical information

Measurements, volumes and weights

Total length59 1/2" (1510 mm)
Total width30" (760 mm)
Max height47 5/8" (1210 mm)
Seat height20-21 1/4" (505-540 mm)
Weight308 to 364 lbs (140 to 165 kg) 59 gal (US) (c 225 L)
Max total weight1213 lbs (550 kg)
Drain flow rate34 gal (US)/min (130 L/min)
Drain flow rate with water trap29 gal (US)/min (110 L/min)

 

Electrical

MarketVoltageFrequencyPower consumption
Europe230/240 V single phase AC50 Hzmax 800 VA
North America120 V single phase AC60 Hzmax 800 VA
Japan100 V single phase AC50/60 Hzmax 800 VA
The unit must be continuously powered and connected to separate fuse with ground fault interrupter.

 

Water supply

Cold/hot water connections, inlets and outlets3/4''
Operating dynamic pressure15-87 psi (100-600 kPa)
Rec. dynamic pressure29-43.5 psi (200-300 kPa)
Operating temperaturesMax HW 176°F (80°C) Min HW 100°F (38°C) Max CW 77°F (25°C)
Recommended temperaturesHW 100-149°F (38-65°C) CW 50-64°F (F10-18°C)
Recommended water flow(CW + HW) 6.6+6.6 gal (US)/min (25+25 L/min)
Minimum drain26.4 gal (US)/min (100 L/min)

* Please check with your local sales representative if the product is available for sale in your country.