Ninjo

Ninjo is an effective flusher disinfector that offers a wide range of design possibilities.

Choose from colourful polymeric or stainless steel finish, and either free standing, wall-mounted or under-counter models, to suit your sluice room needs and preferences.

Ninjo features a control panel with digital display which clearly indicates the disinfection level as well as remaining time to complete the cycle, allowing you to keep track of the cycle progress and plan your workflow.

Ninjo cleans receptacles with a series of high pressure water cycles delivered through strategically located fixed and rotating nozzles, followed by a thermal steam disinfection phase.

Digital A₀ value and remaining time display
Digital display clearly indicates A₀ disinfection level as well as time remaining until end of cycle.

Cooling fan
Built-in cooling fan dries containers quickly and cools them with HEPA-filtered (H13) air.

Reduce risk of cross-contamination
Door remains locked to ensure no spillage throughout cleaning and disinfection cycle. Ninjo uses thermal steam to disinfect receptacles, after which the Pipe System Disinfection (PSD) disinfects its internal pipe and nozzle system.

Two programmes available: economy and normal, with an additional three available upon request.

Flexible design options
Available as a free-standing, wall-mounted or under-counter unit. Choose from stainless steel or colourful polymeric finish.

Compatible with wide range of accessories, Arjo Liquids Flusher Rinse, and Arjo Liquids Flusher Detergent.

NINJO - TECHNICAL DATA
UTILITY REQUIREMENTS
Utility		Unit connection		Supply Pressure requirments			Flow requirement		Comments
Cold water (CW)		15 mm (G½ “)		100-800 kPa (1-8 bar, 14-116 PSi)			20 L/min		See Notes 1 and 3
Hot water (HW)		15 mm (G½ “)		100-800 kPa (1-8 bar, 14-116 PSi)			20 L/min		See Notes 2 and 3
Drain (D)		Ø 90 mm alt. Ø 110 mm		N/A			Peak 1 L/sec		See Notes 3 and 4
Electrical
Voltage			Recommended service disconnect				Full load, Amps		See notes 5 and 6
L1, 230 VAC, 1N+PE, 50 Hz			Max. 3,0 kW, 1 x Fuse C 16 A				13 A
L5, 240 VAC, 2+PE, 60 Hz			Max .3,3 kW, 2 x Fuse C 15 A				13,6 A
L9, 208 VAC, 2+PE, 60 Hz			Max. 3,0 kW, 2x Fuse C 15 A				14,4 A
L14, 200 VAC, 2+PE, 50 Hz			Max .3,0 kW, 2x Fuse C 16 A				15 A
L18, 200 VAC, 2+PE, 60 Hz			Max. 3,0 kW, 2x Fuse C 16 A				15 A
L22, 230 VAC, 1N+PE, 60 Hz			Max. 3,0 kW, 1x Fuse C 16 A				13 A
L28, 240 VAC, 1N+PE, 50 Hz			Max. 3,3 kW, 1x Fuse C 16 A				13,6 A
OPERATING CONDITIONS
Room temperature	5-40°C (41-104F)
Air humidity	< 80% at 31°C (87° F)
Max surface temperature	40° C (104°F)
Noise level
Octave band (Hz)	125	250	500	1000	2000	4000	8000	LwA	LwAFmax	The sound power level as linear octave band levels are presented as A-leveled sound power level, both LwA and LwAFmax.
Correction (Kok)	57	61	58	55	53	48	47	61	75
Estimated LpA levels for Ninjo located in a 70 m³ room, db ref 20 μPa.
Type of room		Description				Operator location *		3 m from washer		The calculated sound power levels are different LpA levels in different types of rooms. With bigger room volume the noise level is reduced and vice versa. Here are three examples of expected LpA levels. * See Note 7
Hard		All walls from concrete etc no absorbing elements.				60		60
Normal		Some sound absorbing elements like furniture and textiles.				56		55
Subdeued		Some absorbing elements in ceiling and textiles.				53		51
Water consumption
Economy program		11 liter ± 10 %*				* if option cooling/drying fan is selected for the cooling phase. If internal cooling is selected, additionally 3 liters ± 1 liter will be added to the stated consumption.
Normal program		18 liter ± 10 %*
Chamber size and volume
Stainless steel 565x410x290, 67 liter						Polymeric 535x400x300, 64 liter
Outer dimensions
		Freestanding					Under counter
Width		450 mm (17” 11/16)					450 mm (17” 11/16)			See installation drawing in subsection installation.
Depth		580 mm (22” 3/4)					580 mm (22” 3/4)
Height		1320 mm (51” 7/8)					870 mm (34” 3/16) 900 mm (35” 7/16) with lid
Weight		90 kg/200 lb					70 kg/155 lb

Notes
1) Cold water recommended quality = potable water accordingly to WHO guidelines, temp. <20°C (<68°F).
2) Hot water recommended quality = potable water accordingly to WHO guidelines, temp. 45-60°C (113-140°F).
3) It shall be the Customers responsibility to eliminate water hammer conditions if they occur in the service piping.
4) It shall be the Customers responsibility to provide a properly sixed and located drainage system in accordance with the national
plumbing code. Consider that other equipment is tied to drain to eliminate slow drainage or backup.
5) It shall be the Customers responsibility to complete all electrical connections using properly sized wiring in accordance with the
national electrical code.
6) It shall be the Customers responsibility to install an approved and fused disconnect switch accordingly to national code in all
electrical supply lines at the washer disinfector location.
7) LpA levels are measured to EN ISO 3747:2000, 1 meter in front of the washer and 1,5 meter above the floor level.