Promote mobility, dignity and independence
Sara Stedy and Sara Stedy Compact enable a single caregiver to assist patients or residents perform sit to stand transfers throughout the day.
Sara Stedy can support early mobility initiatives by encouraging patients to be active during sitting to standing transfers.
AVAILABLE IN TWO SIZES
Sara Stedy enables a single caregiver to assist sit-to-stand tasks for patients of different sizes and clinical assessments.
SIMPLIFIED EVERYDAY TRANSFERS
Sara Stedy and Sara Stedy Compact are non-powered devices.
DSDC DEMENTIA DESIGN ACCREDITED PRODUCT
The Dementia Services Development Centre at the University of Stirling has reviewed Sara Stedy and awarded it a DSDC Product Accreditation Rating Class 1B.
Designed for patients 4’11”-6’6” (149-193 cm) tall and weighing up to 400 lb (182 kg).
SARA STEDY COMPACT
Designed for smaller patients, 4’6”-5’8” (138-172 cm) tall and weighing
up to 400 lb (182 kg).
PIVOTING SEAT OPENING
The pivoting seat can be moved out to enable the patient to stand, and provides an angled seated support during the transfer.
The knee pad provides support for raising into standing and also to the patient’s legs during the transfer.
PEDAL-OPERATED CHASSIS LEGS
Easily adjusted for access to wide chairs.
Allows the patient to support themselves actively by pulling.
|Max safe working load kg||182 kg|
|Max safe working load lb||400 lb|
|Lift Weight (incl battery) kg||29,4 kg|
|Lift Weight (incl battery) lb||64,82 lb|
|Min total storage height mm||1050 mm|
|Min total storage height in||41 1/3 in|
|External width legs closed mm||490 mm|
|External width legs closed in||19 1/3 in|
|External width legs open mm||880 mm|
|External width legs open in||34 2/3 in|
|Internal width leg closed mm||360 mm|
|Internal width leg closed in||14 1/5 in|
|Internal width leg open mm||750 mm|
|Internal width leg open in||29 1/5 in|
|Leg clearance (floor to top of legs) mm||100 mm|
|Leg clearance (floor to top of legs) in||3 7/8 in|
|Chassis clearance (floor to bottom of chassis) mm||30 mm|
|Chassis clearance (floor to bottom of chassis) in||1 1/5 in|
|Lift total length mm||920 mm|
|Lift total length in||36 1/5 in|
|Turning radius mm||1040 mm|
|Turning radius in||40,94 in|
|Low friction castors, the rear two with breaks||yes|
* Please check with your local sales representative if the product is available for sale in your country.