You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information. Switch to the US site. 

Skin IQ

Skin IQ™ Microclimate Manager

Powered by Negative Airflow Technology (NAT), Skin IQ MCM continually draws away excess moisture from the skin/surface interface and helps control skin temperature.

Effective and comfortable for patients
With an outstanding Moisture Vapour Transfer Rate (MVTR) of 130 (g/m2)/hr(1), Skin IQ is more effective in microclimate management than conventional Low Air Loss (LAL) surfaces, which have an average MVTR of 97.7 (g/m2)/hr(2).
Helps reduce shear and friction(3).
Helps improve patient comfort: in a study of 16 healthy participants using Skin IQ MCM on a pressure redistribution surface, it significantly improved the level of comfort(2).
Effective for healthcare providers
Skin IQ can be stored in the facility for early intervention, which may help reduce the length of stay(4).
Easy to use, with quick, intuitive set up and maintenance.
Helps facilitate patient bed ingress and egress with a low, thin profile design (1/4" thick mattress cover).
References
Data on file
Reger SI, Adams TC, Madklebust JA, Sahgal V. Validation test for climate control on air-loss supports. Arch Rhys Med Rehabil. 2001;82(5):597-603.
Data on file.
Data on file.
System Dimensions:
Weight capacity500 lbs. (227 kg)
Overall Length80in - 84in (203.1cm - 213.4cm)
Overall Width35in - 36in (91.4cm - 91.44cm)
Depth/Height of surface7in (17.8cm)
Coverlet Height0.25in (0.635cm)
PackagingSingle unit or 4-pack case
Electrical & Environmental: 
Voltage100 - 240 VAC
Frequency50 - 60 Hz
Ampere Rating0.5 A
Maximum Electrical Leakage100 uA at 115 VAC 60 Hz and 200 uA at 230 VAC 50 Hz 
Power SupplyDCV, Reuseable power supply and cord
Operating Temperature Range14 ̊C (57.2 ̊F) to 35 ̊C (95 ̊F)
Storage Temperature Range-29 ̊C (20.2 ̊F) to 60 ̊C (140 ̊F)

The Skin IQTM Coverlet is classified as a Type B applied part under IEC 60601-1:2006. 

Skin IQ Brochure

Category: Brochure/Booklet

File name: Arjo.Skin IQ.Brochure.1.0.AU.EN.pdf

Type: PDF

Size: 0.74 Mb

EN-AU


* Please check with your local sales representative if the product is available for sale in your country.