Nimbus Professional
Pressure redistribution and comfort
The Nimbus Professional system provides effective active pressure redistribution (alternating therapy) combined with automatic adjustment to the weight, size and position of the individual. It combines Wound Valve Technology, Heelguard, and automatic adjustment of cell pressures, providing effective pressure redistribution to a wide range of patient management issues. Key additional features of the Nimbus Professional include Zoned Wound Valve Technology, sacral section deflate and head section deflate.
References:
1. Ward C, Wubbels M, Schembri L (2012) Using Complete Pressure Off-loading and Advanced Wound Care to Treat a Complex Sacral Pressure Ulcer. Poster Presentation
2. Clancy J (2011) Winning the war against pressure ulcers. Poster presentation
3. Malbrain M, Hendriks B, Wijnands P et al (2010) A pilot randomised controlled trial comparing reactive air and active alternating pressure mattresses in the prevention and treatment of pressure ulcers among medical ICU patients. Journal of Tissue Viability 19(1):7-15
4. Finnegan MJ (2008). Comparing the effectiveness of a specialised alternating air pressure mattress replacement system and an air fluidised integrated bed in the management of post- operative flap patients. A randomised controlled study. Journal of Tissue Viability 17(1): February 2008
5. Russell L, Reynolds TM (2000) Randomised controlled trial of two pressure relieving systems. Journal of Wound Care 9(2):52-55
6. Evans D, Land L, Geary A (2000). A clinical evaluation of the Nimbus 3 alternating pressure mattress replacement system. Journal of Wound Care 9(4):181-186
7. Land L, Evans D, Geary A et al (2000) A clinical evaluation of an alternating pressure mattress replacement system in hospital and residential care settings. Journal of Tissue Viability 10(1): 6-11
8. Phillips L (2010) Nimbus range of pressure redistributing mattresses. Wounds UK, 2010, 6 (2): 116-122
Audible and visual alarms
• The pump includes audible and visual alarms, activating only when genuine intervention is needed for Power Fail, High or Low Pressure and Pump Fault conditions.
Comfort control
• For additional patient comfort, minor adjustments to inflation pressures can be made using a comfort control dial, without affecting therapeutic performance.¹⁶
Infection prevention
• 3 stage filtration provided by the bio-filter ensures only clean air is passed into the mattress.
Nimbus range mattress features
Cover
• Vapor permeable and water resistant 2-way stretch cover offers pressure redistribution and comfort. This loose fitting top cover is attached to the mattress base by concealed zippers to reduce ingress of unwanted fluids. The cover is also flame retardant, easy to clean and can be completely removed for laundering.
Auto-matt sensor pad
• The Auto-Matt sensor pad is designed to adjust cell pressures according to patient weight and positioning on the mattress.
Anti-sink mattress design
• The mattress is made up of 19 deep "figure of 8" designed cells to support patients up to 550 lbs (250 kg), providing active pressure redistribution for all patient types and all categories⁹ of tissue damage.
Wound valve technology
• 5 heel cells incorporate Wound Valve technology, allowing the carer to permanently off-load ("float") the vulnerable heel, for those patients with limb ischemia or existing wounds.
Cable management
• Reduces risk of injury to patient and/or carer by removing trailing cables.
Transport facility
• Seals air in the mattress for up to 12 hours, providing a uniform stable surface for patient transportation, moving and handling, nursing procedures and during periods of power failure.
Heelguard
• Dedicated mattress zone where bottom 5 cells provide maximum pressure redistribution through use of unique "power down" straps, keeping pressure at the vulnerable heel lower for longer (Nimbus 4).
CPR facility
• A quick release, single handed operation, the CPR facility enables rapid air deflation for emergencies, short term physiotherapy, moving and handling or storage.
Nimbus Professional additional features
Zoned wound valve technology
• Zoned Wound Valve Technology allows carers to selectively isolate any one of 19 individual cells under a patient’s body, providing an adaptable support surface for the management of highly vulnerable areas such as grafts, burns, heels and ischemic legs.¹, ⁴, ¹³, ¹⁴
Sacral deflate
• Wound Valves in the sacral section can deflate the mattress to assist with nursing procedures including bed-chair transfer, physiotherapy, low-height patient egress and also specialized interventions such as diagnostic imaging.
Head section deflate
• The 3 head cells can be deflated to remove pressure from beneath the head, or for providing access to the head and neck for specialist nursing procedures (e.g. intubation, cannulation and hygiene).
References:
1. Ward C, Wubbels M, Schembri L (2012) Using Complete Pressure Off-loading and Advanced Wound Care to Treat a Complex Sacral Pressure Ulcer. Poster Presentation
4. Finnegan MJ (2008). Comparing the effectiveness of a specialised alternating air pressure mattress replacement system and an air fluidised integrated bed in the management of post- operative flap patients. A randomised controlled study. Journal of Tissue Viability 17(1): February 2008
9. National Pressure Ulcer Advisory Panel, European Pressure Ulcer Advisory Panel and Pan Pacific Pressure Injury Alliance. Prevention and Treatment of pressure ulcers: Clinical practice guideline. Emily Haesler (Ed). Cambridge Media: Osbourne Park, Western Australia; 2014
13. Masterson S, Younger C (2014) Using an alternating pressure mattress to off-load the heels in ICU. British Journal of Nursing 2014; 23(15): 544, 546-549
14. Ashton J, Sturgess J (2006) Back to basics – simple measures resolve a complex wound: Pressure offloading and honey. Poster presentation, EPUAP 2006
16. Arjo Data on File. Product Validation Test Report 10-100037760
Dimensions | |
---|---|
Mattress A Name | Standard |
Mattress A (L x W x H) mm | 2085 x 890 x 215 mm |
Mattress A (L x W x H) in | 82 x 35 x 8.5 in |
Mattress A Weight kg | 15,5 kg |
Mattress A Weight lb | 34 lb |
Mattress B Name | Narrow |
Mattress B (L x W x H) mm | 2085 x 800 x 215 mm |
Mattress B (L x W x H) in | 82 x 31.5 x 8.5 in |
Mattress B Weight kg | 14,3 kg |
Mattress B Weight lb | 31,5 lb |
Maximum patient weight kg | 250 kg |
Maximum patient weight lb | 550 lb |
Cell Material | Polyurethane |
Pump | |
Pump (L x W x H) mm | 508 x 220 x 100 mm |
Pump (L x W x H) in | 20 x 8.75 x 4 in |
Weight kg | 5,7 kg |
Weight lb | 12,5 lb |
Mode of Operation | Continuous |
Electrical Rating | 35VA |
Operating Cycle Time | 10 minutes |
Shock Protection | Class II Type BF |
Ingress Protection | IP21 |
Power In | 230 VAC, 50Hz |
Standards | EN60601-1, IEC60601-1 |
Explore this product
Type: Leave behind / Brochure
Type: Instructions for use (IFU)
Type: Instructions for use (IFU)
Type: Quick Reference Guide (QRG)
Type: Quick Reference Guide (QRG)
Type: Quick Reference Guide (QRG)
Type: Leave behind / Brochure
Type: Leave behind / Brochure
Type: Clinical evidence brochure
Type: Leave behind / Brochure
Type: Leave behind / Brochure
Type: Leave behind / Brochure
Type: Clinical evidence brochure
Type: Instructions for use (IFU)
Type: Instructions for use (IFU)
Type: Quick Reference Guide (QRG)
Type: Quick Reference Guide (QRG)
Type: Quick Reference Guide (QRG)