You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information. Switch to the US site. 

This website uses cookies

By continuing to use this website you consent to using cookies. For more information about cookies and how we use them, please see our Privacy Policy.


Tornado has been specifically designed to offer options and features to combat cross infection and provide even greater support to effective infection prevention and control routines.

A series of high pressure water cycles delivered through strategically located fixed and rotating nozzles, and followed by a steam phase produces a result that meets and exceeds the stringent cleaning & disinfection requirements of ISO15883 (CAN/CSA Z15883).

The Tornado washer disinfector plays a central role in an efficient sluice room, but is only one element in effective infection control practices. Arjo can help you to create an optimized sluice room and establish an overall infection prevention and control strategy. After choosing the Tornado washer disinfector, the following three steps will create a complete solution:

STEP 1: Choosing the right holder
The universal holder takes most commonly used receptacles and a wide range of holders. However, the optimal performance level can only be reached by selecting the optimal holder from the comprehensive standard range offered by ArjoHuntleigh.

STEP 2: Adding accessories
We offer a number of valuable accessories designed to meet the most stringent process demands, such as; a unique, anatomically designed bedpan with lid, an optimized rinse and de-liming agent and detergents.

STEP 3: Designing a complete sluice room
Arjo considers every aspect of the sluice room and provides a wide range of support from training in good hygiene routines to advice on room layout and equipment selection - a complete furniture concept for the sluice room.
Weight and dimensions
Flusher A Free Standing
Measurements (W x D x H) mm 450 x 580 x 1320 mm
Measurements (W x D x H) inch 17.7 x 22.8 x 52 in
Weight kg 100 kg
Weight lb 220 lb
Flusher B Wall Mounted
Measurements (W x D x H) mm 450 x 580 x 1320 mm
Measurements (W x D x H) inch 17.7 x 22.8 x 52 in
Weight kg 100 kg
Weight lb 220 lb
Flusher C Under Counter
Measurements (W x D x H) mm 900 x 650 x 870 mm
Measurements (W x D x H) inch 35.4 x 24.4 x 34.25 in
Weight kg 120 kg
Weight lb 264,5 lb
Chamber volume Litre 57 L
Chamber volume gallon 15,1 gal
Utility requirements
Electrical connection 230V, 1N, 50 Hz, 1x16A
Cold water connection 15mm, 100-800 kPa, 20 litre/min flow
Hot water connection 15mm, 100-800 kPa, 20 litre/min flow
Drain connection Ø 90 or 110mm
Ingress protection rating IP22, option for IPX4
Operating conditions
Room temperature celcius 5-40°C
Air humidity <80% at 31°C
Max surface temperature celcius 40°C
Noise level 53dB
Energy consumption 0.16 kWh/cycle
Water consumption Economy program 11 litres/cycle ±10% Normal program 18 litres/cycle ±10% Intensive program 25 litres/cycle ±10%
External steam consumption 0.3 kg/cycle


Category: {{document.Category}}

File name: {{document.FileName}}

Type: {{document.Type}}

Size: {{document.Size}}


* Please check with your local sales representative if the product is available for sale in your country.