AtmosAir Velaris

AtmosAir Velaris accommodates a 'One Surface Strategy' as it can replace all but the most advanced automatic surfaces with one easy to use, flexible mattress system.

AtmosAir Velaris is a flexible and cost effective, adaptable alternating pressure system that can be used across a wide range of patient risk categories and care settings.

When connected to the pump, AtmosAir Velaris transforms to an alternating therapy surface that can achieve full pressure offloading¹ with AltoVac® technology.

Without the pump attached, it provides reactive pressure redistribution through the ARM® (Air Redistribution Module) to maintain comfort and pressure levels in each air cell.

Reference:
1. Clark M (2021), Comparative Testing of Interface Pressure Performance of Seven Hybrid Surface Technologies Using a Weighted Mannequin. Arjo whitepaper.

Instant step-up therapy
AtmosAir Velaris performs as a dedicated alternating pressure surface in active therapy mode, but also provides non-powered pressure redistribution when the patient pressure risk level does not require alternating therapy.

AltoVac® Vacuum Technology
With the pump connected, the AltoVac Vacuum Technology sucks air out and inflates air in cycles to provide alternating pressure (AP) therapy with offloading capabilities.

Infection Control Design
Premium cover designed to last 2.5 times longer than ‘standard’ type covers when being used in the same environment. Welded seams and a watershed flap over the full length of the zipper to help prevent fluid ingress.

Comfort and Full Offloading
A top layer of visco-elastic foam and a base layer of firm foam is built into each air cell, offering comfort while eliminating the need for an additional foam layer between the patient and the air cells which can compromise active therapy. Offers firm foam perimeter to support ingress and egress.

Microclimate Management
Powered directly from the AtmosAir Velaris pump, the system can also offer the full microclimate and comfort benefits of Skin IQ®, without impacting the alternating pressure performance. Compatible with both Skin IQ standard and bariatric coverlet.

ARM® (Air Redistribution Module)
In non-powered mode, AtmosAir Velaris is an open pressurized system. The Velaris ARM — Air Redistribution Module maintains a predefined pressure level inside the cells.

Heel zone with active therapy
With a sloped heel zone combining AltoVac vacuum technology alternating air cells with a heel slope, the AtmosAir Velaris hybrid system offers offloading capabilities in the vulnerable heel area.

QuietConcept™ Pump & Automatic dimming LEDs
Pump has silent operation at 19 dB(A) and pump lights automatically dim when built-in sensors detect dark ambience.

AtmosAir Velaris Range
Top cover fabric options	Dartex Reliant or Premium
PVC free	Yes
Welded seams & handles as standard	Yes
Mattress fire tests***	BS7177 (BS597-1, BS597-2, BS6807 Clause 9-Ignition Source 5), 16CFR1632, 16CFR1633, CAL TB 129
Firesock as standard	Yes
AtmosAir Velaris Standard Mattress
Top cover fabric options	Dartex Reliant or Premium
Standard sizes* (W x L x H)	810 x 2000 x 180 mm (31 x 78 x 7 in)
Standard sizes* (W x L x H)	860 x 1980 x 180 mm (34 x 78 x 7 in)
Standard sizes* (W x L x H)	880 x 2020 x 180 mm (35 x 80 x 7 in)
Standard sizes* (W x L x H)	880 x 2140 x 180 mm (35 x 84 x 7 in)
Standard sizes* (W x L x H)	900 x 2000 x 180 mm (35 x 79 x 7 in)
Standard sizes* (W x L x H)	1070 x 2000 x 180 mm (42 x 79 x 7 in)
Ability to connect to AtmosAir Velaris alternating pressure pump	Yes
Weight of mattress	15.0 kg (33 lb) - 17.5 kg (39 lb)
Maximum patient weight	250 kg (550 lb)
Expected service life	5 years
AtmosAIr Velaris Plus Mattress
Top cover fabric options	Dartex Reliant or Premium
Standard sizes* (W x L x H)	1220 x 2140 x 180 mm (48 x 84 x 7 in)
Ability to connect to AtmosAir Velaris alternating pressure pump	Yes
Weight of mattress	24 kg (53 lb)
Maximum patient weight	454 kg (1000 lb)
AtmosAir Velaris Alternating Pressure Pump
Size (W x L x H)	337 x 107 x 200 mm (13.3 x 4.2 x 7.9 in)
Weight	4.1 kg (9 Ib)
Alternating cycle time	10 minutes
Supply voltage	100 - 230 V
Power input	3 - 46 VA
IP rating	IP22
Case material	PC ABS
Sound output	19 dBA
Lock out control panel feature	Yes
Suppress audible Alarm option	Yes
Alarm pause	Yes (15 mins)
Skin IQ adapter part number**	Power cable 636377
Expected service life	7 years
AtmosAir Velaris Stretcher Trolleys (ST) Mattress
Top cover fabric options	Dartex Reliant or Premium
Standard sizes* (W x L x H)	660 x 1910 x 130 mm (26 x 75 x 5 in)
Standard sizes* (W x L x H)	670 x 1950 x 130 mm (26 x 77 x 5 in)
Standard sizes* (W x L x H)	762 x 1910 x 130 mm (30 x 75 x 5 in)
Ability to connect to AtmosAir Velaris alternating pressure pump	No
Weight of mattress	9 kg (20 lb) - 10 kg (22 lb)
Maximum patient weight	250 kg (550 lb)
Expected service life	5 years
AtmosAir Velaris Seat Cushion
Top cover fabric options	Dartex Reliant or Premium
Standard sizes* (W x L x H)	432 x 432 x 100 mm (17 x 17 x 4 in)
Standard sizes* (W x L x H)	457 x 457 x 100 mm (18 x 18 x 4 in)
Ability to connect to AtmosAir Velaris alternating pressure pump	No
Weight of cushion	1.5 kg (3 lb)
Maximum patient weight	250 kg (550 lb)
Expected service life	5 years
* Please contact your Arjo representative to enquire about product and size availability	-
** Skin IQ coverlet and pump connector sold separately	-
*** Standards not available for Velaris Seat Cushion	-